Preparing and connecting cables
Assembly
Assemble the drop cable as shown in
connections, that it, at the ODU or LPU. The connection to the PIDU Plus requires the
RJ45 plug but no gland.
Figure 5-1 Correct cable preparation for drop cable of the supported type
CAUTION
Check that the crimp tool matches the RJ45 connector being used, otherwise
the cable or connector may be damaged.
5-4
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure
5-1. The gland is only required for outdoor
Chapter 5 Installation
phn-0896_012v000
Jul 2010