Figure 6-51 Step 2: Snmp User Policy Configuration Page (For Snmpv3); Table 6-18 Step 2: Snmp User Policy Configuration Attributes (For Snmpv3) - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Figure 6-51 Step 2: SNMP User Policy Configuration page (for SNMPv3)

Table 6-18 Step 2: SNMP User Policy Configuration attributes (for SNMPv3)

Attribute
Security Level
Authentication
Protocol
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Defines the security level and associated protocols that are
required to allow SNMP users to access the PTP 600.
'No Auth No Priv' means that users are not required to use
authentication or privacy protocols.
'Auth No Priv' means that users are required to use only
authentication protocols.
'Auth Priv' means that users are required to use both
authentication and privacy protocols.
The authentication protocol to be used to access the PTP 600
via SNMP. This is disabled when Security Level is set to
'No Auth No Priv'.
'MD5' means Message Digest Algorithm.
'SHA' means NIST FIPS 180-1, Secure Hash Algorithm
SHA-1.
Task 13: Set up SNMP agent
Meaning
6-93