Inventory For Gps Receiver Installations; Table 4-4 Gps Receiver Installation Components - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series
PTP800 CMU / PTP-SYNC 19" rack
mount installation kit

Inventory for GPS receiver installations

A GPS receiver installation (for PTP-SYNC) requires the components listed in
4-4. All of these components must be purchased separately.

Table 4-4 GPS receiver installation components

Trimble Acutime™ Gold GPS receiver
Outdoor drop cable
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Item
Item
Installation inventories
Notes
Motorola part number WB3486.
Required for rack-mounted PTP-SYNC
units.
Kit contents:
1 x rack bracket
8 x M3 washers
8 x M3 screws
1 x rack mount blank plate
8 x M5 nuts
8 x M5 washers
2 x rack handles
Refer to PTP-SYNC specifications
4-26.
Notes
Motorola part number STLN6594.
CAUTION
Always use Cat5e cable that is gel-
filled and shielded with copper-plated
steel. Alternative types of drop cable
are not supported by Motorola.
Superior Essex BBDGe is suitable. Refer
to Cable and connector specifications
page 4-16.
on page
Table
on
4-9