User Guide: PTP 600 Series
Remote LEDs and recovery switch
The PIDU Plus provides a facility to connect remote LEDs and Recovery switch
allowing the PIDU Plus to be mounted inside an enclosure. At the left hand end of the
PIDU Plus under the ODU connection cover can be found a PCB header and three
jumpers. Jumpers J906 and J907 should be removed and connection to the remote
LEDs and Recovery switch made to J908 as shown in
Figure 1-13 Remote LED and recovery switch wiring
PIDU Plus maximum cable lengths
The maximum distance from the ODU to the connected network equipment is 100m
(330 ft) when using Ethernet over copper. Powering distances over 100m (330 ft) are
only applicable when using a Fiber Optic connection. The maximum power distance is
230m.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Powered indoor unit (PIDU Plus)
Figure
1-13.
1-15