Motorola PTP 600 series User Manual page 346

Installing a PTP-SYNC unit
3
To link clustered PTP-SYNC units, connect the SYNC OUT port of the
first PTP-SYNC to the GPS/SYNC IN port of the second PTP-SYNC in the
chain. Repeat for subsequent PTP-SYNC units in the chain.
4
Connect the cable from the PIDU Plus to the PIDU IN port.
5 Connect the cable from the ODU to the ODU OUT port.
5-40
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Chapter 5 Installation
phn-0896_012v000
Jul 2010