Grounding The Gps Receiver Drop Cable - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series
9
Wrap a layer of PVC tape, starting just below the start of the self-
amalgamating tape and finishing at the GPS housing, overlapping at half
width.
Repeat with a further four layers of PVC tape alternating the start and
finish ends.

Grounding the GPS receiver drop cable

For installations where the GPS receiver module is fitted to a metal tower or mast,
ground bond the GPS receiver drop cable to the tower or mast. To identify the
required grounding points, refer to
tower or mast
To ground the cable, follow the procedure described in
page 5-5.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Mounting the GPS receiver module on a metal
on page 2-34.
Installing a GPS receiver for PTP-SYNC
Grounding the drop cable on
5-47