Figure 6-20 Step 2: Tls Private Key And Public Certificate Page - Motorola PTP 600 series User Manual

Ptp 600 series
Hide thumbs Also See for PTP 600 series:
Table of Contents

Advertisement

Task 4: Configure security
Step 2: TLS private key and public certificate
CAUTION
If the certificates expire, the unit will be unreachable. If this occurs, put the
unit into recovery mode and
to
NOTE
If the unit is required to operate in FIPS 140-2 secure mode, ensure that the
TLS Private Key and Public Certificate are generated using a FIPS-approved
cryptographic generator.
To enter the TLS Private Key and Public Certificate via the Security Wizard, proceed
as follows:
Procedure 6-15 Enter TLS private key and public certificate
1
The Step 2: TLS Private Key and Public Certificate page is displayed
6-20).
2
If a valid TLS private key exists, then an SHA-1 thumbprint of the key is
displayed. If this key is correct, then take no action. Otherwise, select
Browse and select the generated private key file (.der).
3
If a valid TLS public certificate exists, then an SHA-1 thumbprint of the
certificate is displayed. If this certificate is correct, then take no action.
Otherwise, select Browse and select the generated certificate file (.der).
4
Select Next.

Figure 6-20 Step 2: TLS Private Key and Public Certificate page

6-28
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Using recovery mode
on page
Chapter 6 Configuration and alignment
erase all configuration. For more information, refer
8-21
.
(Figure
phn-0896_012v000
Jul 2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 25600Ptp 49600Ptp 54600Ptp 58600Ptp 59600Ptp 48600

Table of Contents