Saving The System Configuration; Figure 6-10 Software Version In System Status Page - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Figure 6-10 Software Version in System Status page

Saving the system configuration

To save the current configuration before upgrading to a new software version, proceed
as follows:
Procedure 6-9 Save configuration file
1
Select menu option System, Configuration, Save And Restore. The Save
& Restore Configuration page is displayed
2
Select Save Configuration File.
3
Save the configuration file to a PC hard drive.
The configuration file format is:
MAC-mm-mm-mm_IP-iii-iii-iii-iii.cfg
NOTE
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Where:
mm-mm-mm
iii-iii-iii-iii
Internet Explorer inspects the content of any downloadable file and decides
whether to treat the file as ASCII or binary. As a result of this feature,
Internet Explorer always treats the configuration file as ASCII and attempts
to display it instead of downloading it. Firefox makes no such assumption.
Task 3: Upgrade software version
(Figure 6-11).
Is:
MAC address of unit
IP address of unit.
6-17