User Guide: PTP 600 Series
Step 1: Enter key of keys
The PTP 600 uses a key of keys approach to encrypt all critical security parameters
(CSPs). Erasing of the keys of keys will render all CSPs inaccessible.
NOTE
To enter the Key Of Keys via the Security Wizard, proceed as follows:
Procedure 6-14 Enter the key of keys
1
The Step 1: Enter Key of Keys page is displayed
2
Enter the generated key of keys in both the Key Of Keys and Confirm Key Of
Keys fields. If the two values are not identical, an error message is displayed.
3
Select Next.
Figure 6-19 Step 1: Enter Key of Keys page
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If the unit is required to operate in FIPS 140-2 secure mode, the Key Of Keys
must be entered.
Task 4: Configure security
(Figure
6-19).
6-27