User Guide: PTP 600 Series
Configuring password complexity
Complete this task to configure password complexity rules for the web-based
management interface.
NOTE
If identity-based user accounts are enabled, this task may only be performed by a
Security Officer.
To set these options, proceed as follows:
Procedure 6-21 Configure password complexity
1
Select menu option Management, Web, Local User Accounts. The User
Accounts page is displayed
2
Review and update the password complexity configuration attributes
6-5).
3
To reset all attributes to the best practice values (as shown in
select Set Best Practice values. This is required for FIPS 140-2.
4
If any attributes have been updated, select Submit User Account Updates.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If the unit is required to operate in FIPS 140-2 secure mode, password
complexity configuration must be set to 'Best Practise Values'.
Task 5: Configure password policy
(Figure
6-26).
(Table
Table
6-5),
6-39