Data Throughput Capacity - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Data throughput capacity

Table 4-88,
throughput rates (Mbits/s) that are achieved when two PTP 600 Full ODUs are linked
and the link distance (range) is 0 km. Use the curves in
page 4-128
NOTE
Data throughput capacity is restricted by the following factors:
•
PTP 600 Lite data rates are half the PTP 600 Full rates given in this section.
•
Modulation Mode "256QAM 0.81 dual" is not available in all product variants and
channel bandwidths.
•
Throughput for Link Symmetry 2:1 is the same as that for 1:2, but the Tx and Rx
data rates are swapped.
•
The data rates for Adaptive symmetry apply to the most asymmetric case where
the link has significant offered traffic in one direction only. The data rates for
Adaptive symmetry with bidirectional offered traffic are the same as those for
Link Symmetry = 1:1 with Link Optimization = IP.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Table 4-89, Table 4-90,
to adjust these figures to allow for link range.
When using these tables, be aware of the factors that affect data throughput,
as listed below.
Table 4-91 and Table 4-92
Range adjustment curves
Data rate calculations
show the data
on
4-117