Task 9: Disarm After Alignment; Disarming The Unit - Motorola PTP 600 series User Manual

Task 9: Disarm after alignment

Task 9: Disarm after alignment
This task consists of the following procedure:
•

Disarming the unit

Disarming the unit
When the alignment process is complete, disarm both units in the link. This is
necessary in order to:
•
Turn off the audible alignment aid
•
Enable Adaptive Modulation
•
Fully enable Advanced Spectrum Management with i-DFS
•
Clear unwanted installation information from the various systems statistics
•
Store the link range for fast link acquisition on link drop
•
Enable higher data rates
NOTE
After 24 hours, the units will be disarmed automatically, provided that they
are armed and that the link is up.
When the Installation wizard is complete, the unit is armed and rebooted. When the
unit has rebooted, select menu option Installation. The Disarm installation page is
displayed (Figure
6-78
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 6-78
6-42).
Chapter 6 Configuration and alignment
phn-0896_012v000
Jul 2010