Primary Disconnect Device; External Cables; Grounding Ptp-Sync; Rf Exposure Near The Antenna - Motorola PTP 600 series User Manual

Primary disconnect device

The main power supply is the primary disconnect device.

External cables

Safety may be compromised if outdoor rated cables are not used for connections that
will be exposed to the weather.

Grounding PTP-SYNC

In order to meet the safety requirements for deployment in Australia and New Zealand
(AS/NZS 60950-1), the PTP-SYNC unit, if deployed, must be grounded to a Protective
Ground in accordance with Local Electrical Regulations.

RF exposure near the antenna

Strong radio frequency (RF) fields will be present close to the antenna when the
transmitter is on. Always mute the transmitter before undertaking maintenance
activities in front of the antenna.

Minimum separation distances

Install the ODUs so as to provide and maintain the minimum separation distances from
all persons.
The minimum separation distances for each frequency
variant are specified in
100.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Calculated distances and power compliance margins
Safety
on page 4-
iii