Installing The E1 Or T1 Patch Panel; Figure 5-24 E1 Or T1 Patch Panel; Figure 5-25 Rj45 Pin Connections From Drop Cable To Telecoms Channels (T568B) - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Installing the E1 or T1 patch panel

To connect the E1 or T1 drop cable to the two telecoms channels, install a patch panel
(Figure 5-24).

Figure 5-24 E1 or T1 patch panel

Patch panel connections
Figure 5-25
telecoms channels. The telecoms connection pin outs are specified in

Figure 5-25 RJ45 pin connections from drop cable to telecoms channels (T568B)

phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
shows how the patch panel should connect the E1 or T1 drop cable to the
Installing an E1 or T1 interface
Table 5-2.
5-51