Preparing and connecting cables
3
Once the gland is fully hand screwed into the unit, tighten it with a
spanner to torque 10 Nm (7.4 ftlbs).
4
When the gland body has been fitted, tighten the gland back shell.
Figure 5-3 Correct and incorrect tightening of cable gland back shell
5-10
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
CAUTION
Do not over-tighten the gland back shell, as the internal seal and
structure may be damaged.
and over-tightened gland back shells.
Figure 5-3
shows correctly tightened
Chapter 5 Installation
phn-0896_012v000
Jul 2010