Table 6-25 Web-Based Management Attributes - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Table 6-25 Web-Based Management attributes

Attribute
HTTPS Access
Enabled
HTTPS Port
Number
HTTP Access
Enabled
HTTP Port
Number
Telnet Access
Enabled
Telnet Port
Number
SNMP Control of
HTTP And Telnet
TFTP Client
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Only displayed when HTTPS is configured. Shows the current
status of HTTPS access (enabled or not).
Only displayed when HTTPS is configured. The port number
for HTTPS access. A value of zero means the wireless unit
uses the default port.
'No' means that the unit will not respond to any requests on
the HTTP port.
'Yes' means that the unit will respond to requests on the
HTTP port.
Remote management via HTTPS is not affected by this
setting.
The port number for HTTP access. A value of zero means the
wireless unit uses the default port.
'No' means that the unit will not respond to any requests on
the Telnet port.
'Yes' means that the unit will respond to requests on the
Telnet port.
The port number for Telnet access. A value of zero means the
wireless unit uses the default port.
'Disabled' means that neither HTTP nor Telnet can be
controlled remotely via SNMP.
'Enabled' means that both HTTP and Telnet can be controlled
remotely via SNMP.
'Disabled' means that the unit will not respond to any TFTP
software download requests.
'Enabled' means that software can be downloaded via TFTP,
as described in Remote software upgrade by TFTP
38.
Task 16: Configure remote access
Meaning
on page 7-
6-111