Motorola PTP 600 series User Manual page 518

Ptp 600 series
Hide thumbs Also See for PTP 600 series:
Table of Contents

Advertisement

Managing performance
Attribute
Link Symmetry
Link Capacity
Transmit
Modulation
Mode
Receive
Modulation
Mode
Receive
Modulation
Mode Detail
7-46
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
A ratio that expresses the division between transmit and
receive time in the TDD frame. The first number in the ratio
represents the time allowed for the transmit direction and the
second number represents the time allowed for the receive
direction.
The maximum aggregate data capacity available for user traffic
under the current radio link conditions, assuming the units
have been connected using Gigabit Ethernet. The sum of the
displayed Transmit and Receive data rates may be lower than
this figure if the link isn't fully loaded by the current traffic
profile.
The modulation mode currently being used on the transmit
channel. The number in brackets after the modulation mode
and coding rate string is the effective data rate available to all
MAC layer protocols. List of all the modulation modes can be
found in
Data rate calculations
calculations plots are given for each available modulation
mode.
The modulation mode currently being used on the receive
channel. The number in brackets after the modulation mode
and coding rate string is the effective data rate available to all
MAC layer protocols. List of all the modulation modes can be
found in
Data rate calculations
calculations plots are given for each available modulation
mode.
This supplies the user with information regarding the receive
modulation mode in use. Possible values are:
'Running at maximum receive mode'
'Running at user-configured Target Modulation Mode'
'Restricted because Installation is armed'
'Restricted because of byte errors on the wireless link'
'Restricted because a DFS channel change is in progress'
'Restricted due to the low Ethernet link speed'
'Limited by the radio conditions'
Chapter 7 Operation
Meaning
on page 4-114, where data rate
on page 4-114, where data rate
phn-0896_012v000
Jul 2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 25600Ptp 49600Ptp 54600Ptp 58600Ptp 59600Ptp 48600

Table of Contents