User Guide: PTP 600 Series
Wireless specifications
General wireless specifications
Table 4-23 PTP 25600 RF specifications
Radio Technology
RF Band
Channel Selection
Dynamic Frequency
Control
Channel size
Manual Power Control
Receiver Noise Figure
Antenna Type
Antenna Gain
Antenna Beamwidth
Max Path Loss
Duplex Scheme
Range
Over-the-Air Encryption
Weather Sensitivity
Error Correction
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Lower: 2.496-2.568 GHz
Middle: 2.572-2.614 GHz
Upper: 2.618-2.690 GHz
Manual selection.
N/A
5, 10, 15 and 30 MHz
Maximum power can be controlled lower than the power limits
shown above in order to control interference to other users of the
band.
Typically 5 dB
Integrated flat plate antenna
18 dBi typical
18 Degrees
157 dB (5 MHz channel)
Symmetric fixed, asymmetric fixed or adaptive TDD
125 miles (200km) optical Line-of-Sight
6 miles (10km) non-Line-of-Sight
Proprietary scrambling mechanism.
Sensitivity at higher modes may be reduced during high winds
through trees due to Adaptive Modulation Threshold changes.
FEC
Wireless specifications
Specification
4-29