User Guide: PTP 600 Series
Powered indoor unit (PIDU Plus)
PIDU Plus description
The PIDU Plus generates the ODU supply voltage from the mains supply (or from an
external DC source) and injects this supply voltage into the ODU.
The PIDU Plus is connected to the ODU and network equipment using CAT5e cable
with RJ45 connectors. Refer to
The ODU for the PTP 600 Series should only be deployed using the supplied PIDU Plus
PTP 300/500/600 Series.
CAUTION
PIDU Plus interfaces
The PIDU Plus interfaces are illustrated in
Table
1-4.
Figure 1-7 PIDU Plus interfaces
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Cabling and lightning protection
Care should be taken not to connect equipment other than an ODU, LPU or
PTP-SYNC for the PTP 600 Series to a PIDU Plus ODU port, as equipment
damage may occur. The PIDU Plus PTP 300/500/600 Series is not
interchangeable with the PIDU Plus PTP 400 Series.
Powered indoor unit (PIDU Plus)
on page 1-16.
Figure 1-7
and described in
Table 1-3
and
1-11