Installing the PIDU Plus
Installing the PIDU Plus
Perform this task to install the PIDU Plus and connect it to the ODU and network
cables.
This task consists of the following procedures:
•
Mounting the PIDU Plus
•
Connecting the PIDU Plus to the ODU cable
•
Forming a drip loop
•
Preparing the PIDU Plus to LAN cable
•
Dressing the PIDU Plus cables
Mounting the PIDU Plus
Mount the PIDU Plus on a wall or other suitable mounting surface, at a height that
protects it from flooding or rising damp.
Mount it using the lugs provided, as this prevents the unit from being knocked or
kicked and can help maintain link availability.
Ensure that the Recovery switch can be accessed when mounting the unit.
CAUTION
The PIDU Plus is not waterproof and should be mounted away from sources
of moisture. If mounted outdoors, the unit should be mounted in a rain proof
enclosure, preferably ventilated.
Connecting the PIDU Plus to the ODU cable
The cable from the ODU is connected to the PIDU Plus by means of a concealed RJ45
socket.
CAUTION
Plugging other equipment into the ODU RJ45 socket may damage the
equipment due to the non-standard techniques employed to inject DC power
into the 1000BaseT connection between the PIDU Plus and the ODU.
Plugging the ODU into other equipment may damage the ODU and/or the
other equipment.
5-24
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page
5-24
on page
5-26
on page
on page
5-27
Chapter 5 Installation
on page
5-24
5-27
phn-0896_012v000
Jul 2010