User Guide: PTP 600 Series
Task 4: Configure security
This task is only performed when the PTP 600 link requires AES encryption or
HTTPS/TLS security (including FIPS 140-2 if appropriate).
Depending upon network security requirements, choose one of the following
procedures:
•
If AES encryption alone is required, perform
6-22.
•
If higher levels of security are required, including FIPS 140-2 if appropriate,
perform
CAUTION
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Configuring HTTPS/TLS
Before connecting the PTP 600 to the network, ensure that access to the
web-based management interface is controlled in accordance with the
network operator's security policy.
Configuring AES encryption
on page 6-24.
Task 4: Configure security
on page
6-21