Task 7: Configure wireless interface
Step 3: TDD synchronization (optional)
To enable TDD Synchronization, set the TDD Synchronization Mode attribute to
'Enabled' in the Step 2: Wireless Configuration page
Step 3: TDD Synchronization page is displayed
described in
For more information on the available options, refer to
synchronization
When TDD Synchronization is enabled, the following restrictions apply:
•
Ranging Mode and Target Range are disabled.
•
Link Symmetry is forced to '1:1' operation only.
Figure 6-37 Step 3: TDD Synchronization page
NOTE
The data required to populate this screen is available in PTP Link Planner.
6-64
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Table
6-11. Update the attributes as required and select Next.
on page 2-27.
Chapter 6 Configuration and alignment
(Figure
6-34) and select Next.
(Figure
6-37). The attributes are
Configuration options for TDD
phn-0896_012v000
Jul 2010