Installing an UltraSync GPS receiver
Installing an UltraSync GPS receiver
If the chosen TDD synchronization method requires UltraSync GPS (see
synchronization configurations supported
install the UltraSync receiver.
This task consists of the following procedures:
•
Preparing for UltraSync installation
•
Connecting the UltraSync unit
•
Checking the complete UltraSync unit installation
Preparing for UltraSync installation
Check that the correct components are available. For a typical inventory, refer to
Inventory for UltraSync installations
Refer to the UltraSync user manual for details on the lengths and types of cables used
to connect the UltraSync to the ODU and LPU.
5-34
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 2-27), then perform this task to
on page
5-34
on page
5-35
on page
on page 4-7.
Chapter 5 Installation
TDD
5-36
phn-0896_012v000
Jul 2010