User Guide: PTP 600 Series
Manufacturer
RFS
RFS
RFS
RFS
PTP 58600 FCC antenna restrictions
In FCC regions, external antennas from the lists in
used with the Connectorized version of the PTP 58600. These are approved by the FCC
for use with the product and are constrained by the following limit for Single/Dual
Polarization Parabolic Dish Antennas: up to 37.7 dBi per polarization or antenna.
In FCC regions when using external antennas, cable loss between the connectorized
version of the PTP 600 Series and the antenna ports must not be less than 1.2 dB.
CAUTION
Table 4-15 Allowed antennas for deployment in USA/Canada – 5.8 GHz
Manufacturer
Andrew
Andrew
Gabriel
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Antenna Type
RFS 3-foot Parabolic, SPF3-52AN or SPFX3-
52AN(31.4dBi)
RFS 4-foot Parabolic, SPF4-52AN or SPFX4-
52AN(33.9dBi)
RFS 2-foot HP Parabolic, SDF2-52AN or
SDFX2-52AN (31.4dBi)
RFS 4-foot HP Parabolic, SDF4-52AN or
SDFX4-52AN (33.9dBi)
Antennas not included in this table, or those having a gain greater than the
specified maximum, are strictly prohibited for use with the PTP 58600. The
required antenna impedance is 50 ohms.
Antenna Type
Andrew 1-foot Flat Panel, FPA5250D12-
N (23.6dBi)
Andrew 2-foot Flat Panel, FPA5250D24-
N (28dBi)
Gabriel 1-foot Flat Panel, DFPD1-52
(23.5dBi)
Antenna specifications
Gain
Parabolic
(dBi)
31.4
Y
33.9
Y
31.4
Y
33.9
Y
Table 4-15
and
Table 4-16
Gain
Flat
Parabolic
(dBi)
Plate
23.6
Y
28
Y
23.5
Y
Dish
can be
Dish
4-21