Table 6-20 Step 4: Snmp Trap Configuration Attributes (For Snmpv3) - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Table 6-20 Step 4: SNMP Trap Configuration attributes (for SNMPv3)

Attribute
SNMP Enabled
Traps
SNMP Trap IP
Address 1
SNMP Trap Port
Number 1
SNMP Trap User
Account 1
SNMP Trap IP
Address 2
SNMP Trap Port
Number 2
SNMP Trap User
Account 2
Confirming SNMP configuration (for SNMPv3)
When the Confirm SNMP Configuration page
settings and select either Back or Confirm SNMP Configuration and Reboot.
When the settings are confirmed, the unit reboots.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Select the events that will generate SNMP traps.
The IP address of the first SNMP server (trap receiver). This
will normally be the network management system, but it may
be a separate trap receiver.
Enter zeros to disable logging on the first SNMP server.
The server 1 port at which SNMP traps are received.
The user name (and associated protocols) to use when
sending SNMP traps to server 1.
The IP address of the second SNMP server (trap receiver).
This will normally be the network management system, but it
may be a separate trap receiver.
Enter zeros to disable logging on the second SNMP server.
The server 2 port at which SNMP traps are received.
The user name (and associated protocols) to use when
sending SNMP traps to server 2.
Task 13: Set up SNMP agent
Meaning
(Figure 6-54) is displayed, review the
6-97