Figure 6-50 Step 1: Snmp Configuration Page (For Snmpv3) - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series
Step 1: SNMP configuration (for SNMPv3)
To configure SNMPv3 notifications, proceed as follows:
Procedure 6-36 Configure SNMP notifications (for SNMPv3)
1 When the Step 1: SNMP Configuration page is displayed, set SNMP State to
'Enabled' and set SNMP Version to 'v3'. The page is redisplayed with
SNMPv3 attributes
2
Update the attributes
3 Select Next.
4
The next step depends upon which SNMP Security Mode is selected:

Figure 6-50 Step 1: SNMP Configuration page (for SNMPv3)

phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
(Figure
(Table
If it is 'Web-based', go to
SNMPv3) on page 6-92.
If it is 'MIB-based', go to
on page 6-97.
6-50).
6-17).
Step 2: SNMP user policy configuration (for
Confirming SNMP configuration (for SNMPv3)
Task 13: Set up SNMP agent
6-91