Reconnecting To The Management Pc; Figure 6-6 Configuration Reboot Page; Figure 6-7 Configuration Reboot Page - Ethernet Auto Negotiation Disabled - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Figure 6-6 Configuration Reboot page

Figure 6-7 Configuration Reboot page - Ethernet auto negotiation disabled

Reconnecting to the management PC

If the IP Address, Subnet Mask and Gateway IP Address of the unit have been updated
to meet network requirements, then reconfigure the local management PC to use an IP
address that is valid for the network. Refer to
page 6-2.
When the unit has rebooted, log in using the new IP address. Refer to
web interface
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 6-4.
Task 1: Configure IP and Ethernet interfaces
Configuring the management PC on
Logging into the
6-11