Motorola PTP 600 series User Manual page 419

User Guide: PTP 600 Series
Attribute
Target Range
Platform Variant
Antenna Gain
Cable Loss
Frequency Band
Channel
Bandwidth
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Installers that know the range between the two wireless units
to within ± 1 km can use the target range mode. The main
advantage of the target range mode is that it reduces the
time taken by the units to range. To use the target range
mode the installer MUST select Target Range as the ranging
mode and enter the approximate range in km in the Target
range data entry field at both ends of the link.
Chooses between an integrated unit or a connectorized unit
that requires an external antenna.
Gain of the antenna that is connected to the unit.
Loss in the cable between the ODU and the antenna.
NOTE
If there is a significant difference in length of the antenna
cables for the two antenna ports, then the average value
should be entered.
Only displayed for the PTP 25600 frequency variant, which
operates in one of three bands as described in
channel bandwidth operation
Lower: 2496 MHz to 2568 MHz
Middle: 2572 MHz to 2614 MHz
Upper: 2624 MHz to 2690 MHz
Users can choose a variable channel bandwidth for the
available spectrum. The selection depends upon the
frequency variant and region. For more information, see
Table 1-1.
Task 7: Configure wireless interface
Meaning
Variable
on page 2-5:
6-59