Auto-Cost Reference-Bandwidth - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

auto-cost reference-bandwidth

The BSR OSPF routing process calculates the OSPF cost metric for an interface
according to the bandwidth of this interface. The cost of an interface depends on the
type of interface.
calculation. The formula to calculate the cost is the reference bandwidth
divided by interface bandwidth.
Use the auto-cost reference-bandwidth command to set the automatic cost metric
that the OSPF routing process uses to differentiate the cost of multiple
high-bandwidth links.
Use the no auto-cost reference-bandwidth command to remove the OSPF cost
metric for a link.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
auto-cost reference-bandwidth <ref-bw>
no auto-cost reference-bandwidth <ref-bw>
Command Syntax
ref-bw
Command Default
The ref-bw is 10
8-12
OSPF uses a reference bandwidth of 100 Mbps for cost
The reference bandwitdth from 1 to 4292967
Mbps.
8 .