Restoring The Configuration File - Motorola PTP 600 series User Manual

Restoring the configuration file

Restoring the configuration file
Perform this task to restore the operational configuration of the unit.
Before starting this task, ensure that:
•
The configuration file of the old (faulty) unit has been saved.
•
The new (replacement) unit has been installed.
•
The license key of the old unit has been entered in the new unit.
To restore the configuration file, proceed as follows:
Procedure 8-20 Restore configuration file
1
From the left hand menu, select Configuration, Save And Restore. The
Save & Restore Configuration page is displayed.
2
Select Browse and navigate to the PC folder containing the saved
configuration file (.cfg).
3
Select Restore Configuration File and Reboot.
4 Select OK to confirm the restore.
The configuration file is uploaded and used to reconfigure the new unit to
the same state as the old unit. On completion, the unit reboots.
8-28
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Chapter 8 Troubleshooting
phn-0896_012v000
Jul 2010