Variable Channel Bandwidth Operation - Motorola PTP 48600 User Manual

User Guide: PTP 600 Series

Variable channel bandwidth operation

The selection of Channel Bandwidth depends upon the PTP frequency variant:
•
For PTP 25600, PTP 45600, PTP 54600, PTP 58600 and PTP 59600, Channel
Bandwidth may be 30, 15, 10 or 5 MHz.
•
For PTP 48600 and PTP 49600, Channel Bandwidth may be 20, 10 or 5 MHz.
The 30MHz channel widths are available where allowed by local regulations and
subject to some restrictions on channel choice.
Lite versions of the PTP 600 products do not support a Channel Bandwidths of 5 MHz.
Configuration of the variable bandwidth operation must be symmetric, that is, the
Transmit and receive channels must use identical Channel Bandwidths.
For details of the spectrum settings that are available to each frequency variant, refer
to:
•
PTP 25600 available spectrum settings
•
PTP 45600 available spectrum settings
•
PTP 48600 available spectrum settings
•
PTP 49600 available spectrum settings
•
PTP 54600 available spectrum settings
•
PTP 58600 available spectrum settings
•
PTP 59600 available spectrum settings
phn-0896_009v003
Feb 2010
on page
on page
on page
on page
on page
on page
on page
UNDER DEVELOPMENT
Variable channel bandwidth operation
4-21
4-29
4-39
4-49
4-60
4-80
4-93
2-5