Removing The Shield And Filler Panel - Digital Equipment 300 Series AXP Reference Manual

To remove these items:
Step
1
2
Figure 2–13 Removing the Shield and Filler Panel
To cable the drive, hold it outside the system unit before you
Connect the
Drive Cables install it, follow these steps, and refer to Figure 2–14:
Step
1
2
Removing and Installing a Removable-Media Drive
Action
Release the filler panel from the metal shield by gently
pressing on the filler panel tabs and pushing outward.
See in Figure 2–13.
Store the shield and filler panel for future use.
Action
Connect the large connector
power port on the back of the RX26 drive.
Connect the small connector
smaller power port on the back of the drive.
1
MLO-010273
on the power cable to the
on the power cable to the
2–25