Digital Equipment 300 Series AXP Reference Manual page 170

TEST
Example: test
tc Command
4–72
If an external loopback is not present, the following message is
displayed:
T-STS-NI - Ext lpbk test
? T-ERR-NI - Exte Lpbk test
T-ERR-NI - Err = ac
?? 000 NI0x00f2
The TURBOchannel (TC) diagnostic test tests TURBOchannel
options in slots 0 and 1 using MIPS emulator scripts.
In addition to diagnostic testing, the MIPS emulator performs
these additional tasks on a TURBOchannel option:
• Initializes the option
• Displays option configuration
• Runs the console on a TURBOchannel option
• Boots the operating system using a TURBOchannel option
Not all TURBOchannel options can be successfully tested
with this command. Refer to your option installation
manual for additional information.
The following is the command format for the TURBOchannel
self-test:
device_name
>>> t[est]
where:
• is the TURBOchannel device name in the form
device_name
of TCn, where n is the slot number of the TURBOchannel
device you wish to test.
To test a device connected to slot 2, enter the following command:
>>> test tc2
Note
Return