Removing And Installing A Turbochannel Option (For Models 300/300X/300Lx Systems) - Digital Equipment 300 Series AXP Reference Manual

Removing and Installing a TURBOchannel Option (For Models 300/300X/300LX Systems)

Removing and Installing a TURBOchannel Option (For
Models 300/300X/300LX Systems)
Definition of A TURBOchannel bus is a high-performance interconnection
TURBOchannel that allows you to support up to two monitors and use a
variety of Digital options, third-party graphics, multimedia,
and communications options. The TURBOchannel bus is a
synchronous asymmetrical I/O channel that connects option
modules to the system module.
Multiscreen Using a TURBOchannel module you can connect two (or more)
Capability monitors: one to the built-in HX graphics module, and an
additional one (or two) to the HX or TX TURBOchannel modules
that you install. When you connect an additional monitor to the
TURBOchannel module in slot 0 or slot 1, it is the first console
device detected on the TURBOchannel, and therefore becomes
the console device.
2–38