4.3 Preparing Your System for an Expansion Box
If you plan to add an expansion box to your system, you must first remove the
SCSI cover and the terminator connected to the SCSI port.
Turn off your system by setting the on/off switch to the off (0) position.
2
Place your fingers under the locking tab on the SCSI port cover and lift the
cover to release it. See Figure 4-1.
Figure 4-1
Removing the SCSI Cover
Lift
Locking Tab----;;::__-=-___;:_:_..;:_-'-'--
to Release
RE_EN05163A_90
3
Remove the SCSI terminator. Figure 4-2 shows you how to remove the
terminator.
4-4
Installing Peripheral Devices