Recording Information Before Making Changes
What to
Refer to the following table to resolve a configuration error:
Do About a
Configuration
If you...
Error
Are not comfortable
diagnosing technical
errors
Are comfortable
diagnosing technical
errors
The show mem
The
Command
•
•
•
Record this information for later reference. After adding or
replacing memory, you can compare the new system configuration
with the previous one to verify that all options are present and
functioning correctly.
Enter the
>>>
2–10
command displays the following information:
show mem
Bank number
Memory size for each bank
Start address for each bank
show mem
command as follows:
show mem
Return
Then...
Contact your Digital service
representative.
Refer to Chapter 4 for a description
of console commands, Chapter 8
for FRU codes, and the DEC 3000
Model 300 Series AXP Service
Guide for more information.