Digital Equipment 300 Series AXP Reference Manual page 139

Example: set
enable_audit
Command
Example:
set language
Command
In the following example, the diagnostic environment is set to
console mode.
>>> set diag_s 1
Return
Result:
DIAG_SECTION = 1
To execute the enable_audit command, use the following
set
syntax:
>>> set enable_a[udit] {value}
The following example enables the boot audit trail.
>>> set enable_a on
Return
Result:
ENABLE_AUDIT = ON
To execute the set language command, use the following syntax:
>>> set l[anguage] {value}
Return
Return
SET
4–41