Digital Equipment 300 Series AXP Reference Manual page 146

SHOW
Table 4–10 (Cont.) Environment Variables and Values for the
Environment
Variable
mop
secure
radix
scsi_a
scsi_reset
trigger
Example: show The following example displays the current values for all
Command environment variables.
>>> sh[ow]
4–48
show Command
Variable Description
Displays the NI
(Ethernet) listener.
Displays system
security status. This
command works in
conjunction with
the console secure
jumper located on
the system module.
Displays the
default Radix (base
number).
Displays the SCSI
ID for the system
bus
Displays the
time delay (in
milliseconds) after
a SCSI reset and
before booting.
Displays the current
trigger setting.
Return
Value Value Description
On Network listener
enabled. Receive
and transmit
network messages.
Off Network listener
disabled.
On Secure feature
enabled.
Off Secure feature
disabled.
0 Default base
address (hexa-
decimal form.)
10 Decimal base
address.
16 Hexadecimal base
address.
Value = 0 Number of the
through 7. host ID.
Value = 0
through 7.
On Trigger enabled.
Off Trigger disabled.