Digital Equipment 300 Series AXP Reference Manual page 144

SHOW
Environment Table 4–10 provides a list of the environment variables that can
Variables and be specified when the
Values
Table 4–10 Environment Variables and Values for the
Environment
Variable
auto_action
bootdef_dev
boot_osflags
boot_reset
config
device
diag_loe
4–46
show command is used.
Command
Variable Description
Displays the action
the console takes
following an error
halt or a halt during
startup.
Displays the default
boot device or device
list from which
booting will next be
attempted.
Displays default
parameters passed
to system software
during booting.
Displays the value
of the boot_reset
variable.
Displays the system
configuration and
device status.
Displays SCSI and
Ethernet device
information.
Displays the
diagnostic loop
on error feature.
show
Value Value Description
Restart A restart was
executed.
Boot A reboot was
executed.
A halt was
Halt executed.
On System
initialization
enabled.
Off System
initialization
disabled.
On System
initialization
enabled.
Off System
initialization
disabled.
See
Chapter 2.
On Loop on error
enabled.
Off Loop on error
disabled.
(continued on next page)