Digital Equipment 300 Series AXP Reference Manual page 233

Seek time maximum (full stroke)
Average latency
Rotational speed
Interleave ratio
The following table lists the operating conditions of the drive:
Operating
Conditions
Operating Conditions
Ambient temperature
Relative humidity
Altitude
Maximum wet bulb temperature
Heat dissipation
Temperature gradient
Nonoperating The following table lists the nonoperating conditions of the drive:
Conditions
Nonoperating Conditions
Ambient temperature
Relative humidity
Altitude
Maximum wet bulb temperature
Temperature gradient
SCSI ID Jumper Figure B–3 shows the SCSI ID settings for the RZ25L fixed disk
drive. You may need to remove the bracket attached to an RZ25L
Settings
drive to access the jumper locations. Remember, no two devices
can be set to the same SCSI ID. SCSI ID 7 is reserved for the
host SCSI ID. Refer to Chapter 2 for additional information.
RZ25L Fixed Disk Specifications
23 msec
5.4 msec
6
5411 rpm 0.5%
1:1
5°C to 50°C (41°F to 122°F)
8%–80%
305 m to 3048 m (–1000 ft to
10,000 ft)
28°C (82°F) (noncondensing)
8.4W (seeking) 7W
(typical)
20°C/hr (36°F/hr)
–40°C to 70°C (–40°F to 158°F)
5%–95%
–305 m to 12,210 m(1000 ft to
40,000 ft)
46°C (115°F)
25°C (45°F/hr)
B–13