Removing and Installing a Removable-Media Drive
Install the Filler
Panel and Metal
Shield
Remove the
Filler Panel and
Metal Shield
2–24
After you remove a removable-media drive, look for a plastic
filler panel and metal shield that came in your shipment (see
Figure 2–12). To fill in the space that the front of the drive
occupied:
Step
Action
1
Insert the filler panel
open slot on the system unit cover bezel, as shown in
Figure 2–12.
2
Insert the metal shield
open slot on the system unit cover bezel, as shown in
Figure 2–12.
Figure 2–12 Installing the Shield and Filler Panel
1
If you did not order a removable-media drive from the factory
when you placed your order with Digital, and are installing one
now, you must first remove the plastic filler panel and metal
shield from the front bezel on the system unit cover.
from the outside into the
from the inside into the
2
MLO-010570