To cable the drive that you are installing in position 2, follow
Cabling for
Drive in
these steps and refer to Figure 2–18:
Position 2
Step
1
2
3
Figure 2–18 Cabling a Drive in Position 2
Removing and Installing a Fixed Disk Drive
Action
Connect the large power connector
to the power port on the back of the RZxx drive.
Connect the internal SCSI cable
up, to the back of the disk drive.
Tuck the SCSI terminator
SCSI cable, in the mounting bracket under the RZxx drive
in device position 2.
2
on the power cable
, with the key facing
, located at the end of the
1
3
MLO-010242
2–31