The Show Config Display - Digital Equipment 300 Series AXP Reference Manual

Recording Information Before Making Changes
The show Enter the
config
>>>
Command
The
•
•
•
Record this information for later reference. After adding or
replacing option modules, you can compare the new system
configuration with the previous one to verify that all options are
present and functioning correctly.
Figure 2–2 shows an example of a
Table 2–2 defines the elements of the display.
Figure 2–2 The show config Display
DEC 3000 M300
Digital Equipment Corporation
VPP PAL X5.25-80800101/OSF PAL X1.14-80800201 - Built on 2-OCT-1993
TCINFO DEVNAM DEVSTAT
------ -------- --------
CPU OK KN16-AA - Vx.x-Syyy-Izzz- sx.x - DECchip 21064 P3.0
ASIC OK
MEM OK
FEROM OK
6
CXT OK
5
NVR OK
SCC OK
NI OK
ISDN OK
4
SCSI OK
>>>
2–6
command as follows:
show config
show config
Return
command displays the following information:
show config
The system model number
Revision number of the PAL (privileged architecture library)
chip
Name or mnemonic and status of the device
display.
show config
12:47:55.09