Boot_Osflags Command Values - Digital Equipment 300 Series AXP Reference Manual

Table 4–7 boot_osflags Command Values
Root
0
E
0
1
The following example initiates a default boot of the operating
system.
>>> set boot_osf 0,0
Example: set To execute the
boot_reset
Command
>>> set boot_r[eset] {value}
The following example enables the system initialization before
booting.
>>> set boot_r on
Result:
BOOT_RESET = ON
Example: To execute the
set diag_loe
Command
>>> set diag_loe [ value ]
The following example sets up a loop on error.
>>> set diag_loe on
Result:
DIAG_LOE = ON
Contents of R5
0
0
1
If installed on disk
Return
boot_reset command, use the following syntax:
set
Return
diag_loe command, use the following syntax:
set
Return
Description
Default boot of operating system
Boot standalone backup
Conversational boot
Return
Return
SET
1
4–39