Troubleshooting Audio Problems - Digital Equipment 300 Series AXP Reference Manual

Table 7–6 (Cont.) Troubleshooting Network Problems
Symptom
Cannot boot from the
network.
Data transfer problems.
Table 7–7 Troubleshooting Audio Problems
Symptom
No audio tones from the
system when it is turned on.
Possible Cause
Local network problem.
Defective NI interface.
Network connection
Possible Cause
Defective sound chip.
Using the Troubleshooting Tables
Corrective Action
Problem is most likely caused by
the customer's server system or
the network.
Refer to Chapter 4 for
information on running
diagnostic tests.
If you are using an AUI or
ThinWire adapter to convert
your network connection from
10BASE-T to another network
protocol, turn off the heartbeat
in the network transceiver
(DELNI) to eliminate the
problem, or contact your Digital
service representative.
Corrective Action
Refer to Chapter 4 for
information on running
diagnostic tests.
7–9