Drive Mounting Panel Removal - Digital Equipment VAXstation 3100 Maintenance Manual

92 VS 3100 (Model 30)
System
2. Unscrew the two cover screws (Figure 4-3).
COVER
-· -·-·- · _ 8.C.BEW _ _
LOCATIONS
Figure 4-3 Cover Screw Locations
3. Slide the cover forward and up off the system box.
4.2.2 Drive Mounting Panel Removal
1. Remove the system box cover (Section 4.2.1).
UA · XD111 · 11
Z"
Disconn~t
the
power cable from the power supply and disconnect the
MSC cable (Figure 4-4 for a ST506/SCSI MSC module) or (Figure 4-5
for
a
SCSI/SCSI MSC module).