Network Boot - Digital Equipment 300 Series AXP Reference Manual

BOOT
Example:
OpenVMS

Network Boot

4–14
The following example performs a Maintenance Operations
Protocol (MOP) boot to device ESA0 with the flags equal to 0,0.
>>> b -fl 0,0 esa0
Return
To perform a MOP boot from another node over the network on
OpenVMS systems, follow these steps and refer to the example
that follows:
1. Identify the Ethernet address of the node you want to boot
2. Set trigger on
3. Set on
mop
$ mc ncp ! From any non-privileged account
Return
NCP>>> trigger via sva-0 phy add 08-00-2b-2a-1f-82 ser pass
1234567890abcdef
Return
Follow these steps to access the console on a remote system:
1. Identify the Ethernet address of the node you want to boot
2. Set trigger on
3. Set on
mop
$ mc ncp ! From any non-privileged account
Return
NCP>>> conn via sva-0 phy add 08-00-2b-2a-1f-82 ser pass
1234567890abcdef
Return
>>> login
Return
PSDWO>>> ! Enter password
Return
>>> exit ! Console mode
Return