Digital Equipment 300 Series AXP Reference Manual page 108

BOOT
Table 4–2 (Cont.) Parameters/Qualifiers for the
Parameter/Qualifier
-ns
Using the boot •
Command
•
•
Additional information about boot flags is provided in your
operating system documentation.
For this operating
system...
OpenVMS AXP
DEC OSF/1 AXP
4–10
Description
Tells the console to not start the code
after it has been loaded. This parameter
can be used as a debug tool.
Issuing the command with the
boot
boot_device_name parameter overrides the current default
value for the current boot request, but it does not change the
stored default value.
If no device name is specified with the
the default boot device, stored using the
command , is assumed.
If no flag is given, then the default value is read from
the environment variable stored by the
command. If no value is specified for the flags, the value (0,
0) is assumed.
Refer to the...
OpenVMS AXP Installation and Upgrade
Manual
Guide to Installing DEC OSF/1 AXP
boot Command
, qualifiers and
-fl -fi
command,
boot
set bootdef_dev
set boot_osflags