Digital Equipment 300 Series AXP Reference Manual page 50

Preparing Your System
Figure 2–6 Removing the System Cover
Do not run the system for an extended period of time (15
WARNING:
minutes) with the cover removed. Prolonged use of the system
Thermal
Problems without the cover may cause thermal problems.
CAUTION: Do not touch anything inside the system unit until you attach
the antistatic wrist strap included with your system or option
Static
shipment. Always use this strap when you work inside the
Discharge
system unit to avoid damage to internal devices from static
discharge. Digital also recommends that you use an antistatic
mat.
To attach the antistatic wrist strap, shown in Figure 2–7, follow
the steps printed on the envelope containing the strap. Save this
envelope for storing the strap.
2–18
2
0
I S D
1
N
1
MLO-010097