Set Diag_Section Command Values - Digital Equipment 300 Series AXP Reference Manual

SET
Example: set To execute the
diag_quick syntax:
Command
>>> set diag_q[uick] [value]
The following example sets the diagnostic startup mode to quick
verify testing.
>>> set diag_q on
Result:
DIAG_QUICK = ON
Example: set To execute the
diag_section syntax:
Command
>>> set diag_s[ection] {value}
Select one of the following values to set the diagnostic
environment.
Table 4–8 set diag_section Command Values
Value
0
1
2
4–40
diag_quick command, use the following
set
Return
Return
diag_section command, use the following
set
Mode Description
Power-up Power-up operation.
Customer Default mode after power is applied to
(Console) system
Service Sets up diagnostic environment. Provides
for more thorough testing. Loopback
connectors may be required to execute
certain tests.
Return